VTech Toot-Toot Drivers Garage Parents' Manual page 13

4. Assemble and attach the Car Wash, Spiral Ramp and Repair
Platform following the steps below:
A. Attach the Car Wash Brush to the Car Wash Gate, as shown
below. Once the pieces are attached, connect the Car Wash
Gate to the Car Wash Platform, as shown below.
Note: Once the Car Wash Gate is attached, it cannot be
removed.
B. Attach Ramp Track A to the Ramp Track Support. Then, attach
the Repair Platform to the Ramp Track Support and Ramp
Track A, as shown below. You will hear a "click" sound to indicate
the pieces are secure.
12
12
12