Advertisement
Before cleaning this heater, the heating element of the heater must be cool.
1. Before removing grille, turn the electrical power OFF by unplugging it. If it isn't unplugged electricity will still
be flowing to the heater, even if the heater does not appear to be working. If you are uncomfortable working
with electrical appliances, unable to follow these guidelines, or do not have the necessary equipment, consult a
qualified electrician. Once you verify the power is off and disconnected completely, proceed to the next step.
2.
Remove 6 Phillips head screws located on the top of the door and save and inspect the sealing washers for damage,
replace if needed.
3. Using a compressor or vacuum on blow cycle, blow debris back through the element. Clean blower and
replace the air intake filter.
4. To clean the fan and motor remove the cover from the top of the heater. This provides access to the fan and
motor.
5. Wipe the blower and motor with a soft cloth or brush. The fan motor does not require lubrication.
6. Replace safety grill and electrical compartment.
7.
Replace cover and secure with screws and and rubber sealing washers.
8. Plug the unit back in and test by turning ON and OFF.
9.
Do not store outside or in any wet or humid location.
When not in use extension cords can be stored on bottom rack if frame is used.
10.
King Electrical Manufacturing Company will repair or replace, without charge to the original owner, any PKB Se-
ries portable heater found to be defective or malfunctioning within 1 year of installation. If the product becomes
defective, contact King at 206-762-0400 for instructions on how to replace heater. Do not return the heater to
the store. All returned goods require a Returned Goods Authorization. This warranty requires the owner or his
agent install the heater in accordance with these instruction, the National Electrical Code and any other applica-
ble heating or electrical codes. It further requires that reasonable and necessary maintenance be performed on
the unit. The company is not liable for abuse or misuse of product. King Electrical Manufacturing Company is not
responsible for replacement of discolored flooring material due to hot air from this heater. Suitable installation
and placement selection for this heater is the responsibility of the installer and the end user.
King Electrical Mfg. Co. 9131 10th Ave So. Seattle, WA 98108 206-762-0400 www.king-electric.com
Maintenance & Warranty
Cleaning instructions
Warranty Information
pkb_install_2012.pu
4
Advertisement
