Preparation - Panasonic CQ-RXBT490U Operating Instructions Manual

Preparation

First Time Power On
1
Set your car's ignition
switch to the ACC or ON
position.
2
Press [SOURCE] (PWR).
Battery Installation
Pull the insulation film
out from the backside of
the remote control unit
gently.
Note: Battery Information:
Battery Type: Lithium battery (CR2025) (Included in
the remote control unit)
Battery Life: Approximately 6 months under normal
use (at room temperature)
Clock Setting
1
Press [MENU].
2
Press [VOL] (PUSH SEL), and turn [VOL]
clockwise or counterclockwise to select
"CLOCK SET".
3
Press [VOL] (PUSH SEL), and turn [VOL]
clockwise (q) or counterclockwise (w) to
adjust.
4
Adjust the hour.
q : sets the hour ahead.
w : sets the hour back.
5
Press [VOL] (PUSH SEL).
10
CQ-RXBT490U
6
7
Notes:
¡"CLK ADJUST" is displayed before adjusting the
¡When you want to readjust the clock, repeat steps 1
Insulation film
Clock Display at Power Off
Press [DISP] to change the display.
Clock Display Setting
1
2
3
Hour blinks.
Hour entered
Notes:
¡The clock display setting (12-hour/24-hour) is ac-
¡Selection of the 12-hour system displays "AM" dur-
Minute blinks.
¡To exit from the clock display setting, press [DISP].
Adjust the minute.
q : sets the minute ahead.
w : sets the minute back.
Press [VOL] (PUSH SEL).
clock.
to 7.
cd
Press [MENU].
Press [VOL] (PUSH SEL), select "CLOCK
SEL".
Press [VOL] (PUSH SEL), and turn [VOL]
clockwise or counterclockwise to select.
cd
tivated once the rotary selection is made, the clock
display is corresponded to your setting after exiting
the clock display setting mode.
ing AM hours and "PM" during PM hours.
Minute entered
Completed
Display off
Clock display
(Default)
the 12-hour system
used (default)
the 24-hour system
used