Physical Outlook; About Z-Wave Tm - Sense Innoband SC00 User Manual

Physical Outlook

2
1
Front View
1 Inclusion Button
2 Exclusion Button
3 LED Indicators (x4)
4 Recessed Reset Button
About Z-Wave
TM
Z-Wave is a wireless communications protocol designed to remotely control applications in
residential and commercial environments.
TM
Each Z-Wave network is identified by a Network ID, and each device is further identified
by a Node ID. A device must be "included" to the Z-Wave
controlled via Z-Wave
This 'Inclusion" process (also known as "pairing" and "adding") is achieved by pressing a
sequence of buttons on the controller and the device being added to the network. This
sequence only needs to be performed once, after which the device is always recognized by
the controller. Devices can be removed from the Z-Wave
process of button strokes.
Summary:
Function Description
Inclusion Add a Z-Wave device (e.g. Dimmer) to Z-Wave network
Exclusion Remove a Z-Wave device (e.g. Dimmer) from Z-Wave network
Reset Restore Sense Commander to factory default
Top View
TM
TM
.
3
5 USB Ports (reserved)
6 Ethernet Network Jack
7 DC Power Jack
TM
network before it can be
TM
network by a similar "Exclusion"
4 7
5
6
Rear View
5