Listing - Phonic PAA3 User Manual

AUDIO TEST SIGNAL TRACK LISTING
The following is the list of the audio test signals on the CD included along with the PAA3:
1 Pink Noise, 60 seconds
2 Polarity Test Signal, 60 seconds
3 White Noise, 60 seconds
4 250 Hz Sine Wave, 30 seconds
5 500 Hz Sine Wave, 30 seconds
6 1 kHz Sine Wave, 30 seconds
7 2 kHz Sine Wave, 30 seconds
8 5 kHz Sine Wave, 30 seconds
9 10 kHz Sine Wave, 30 seconds
10 12.5 kHz Sine Wave, 30 seconds
11 Stepped Sequence Frequency Up 20Hz~20 kHz, 5 seconds for each frequency: 20Hz, 25Hz,31.5Hz,
40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz,630Hz,
800Hz, 1 kHz, 1.25 kHz, 1.6 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz,10 kHz,
12.5 kHz, 16 kHz, 20 kHz
12 Channel Test, at 1 kHz, Left Channel, 10 seconds
13 Channel Test, at 1 kHz, Right Channel, 10 seconds
14 Frequency Sweep Up 20Hz~20 kHz, 50 seconds
15 In Phase, at 250 Hz, 30 seconds
16 Out Of Phase, at 250 Hz, 30 seconds
17 Digital Blank, 60 seconds
18 SMPTE/EBU, Time Code, 30 seconds
19 High E
20 Low B
21 Low G
22 Low D
23 Low A
24 Low E
25 Frequency Sweep Up, 20Hz~20 kHz, 35 seconds
26 Frequency Sweep Down, 20 kHz~20Hz, 35 seconds
PAA3X
21