Specifications - Phonic PAA3 User Manual

SPECIFICATIONS

Input/Output:
Microphone
Line
Data Port
Display :
SPL, dBu, dBV, Voltage
RTA
Measurement Range
SPL (Microphone input)
dBu (Line input)
dBV (Line Input)
Voltage (Line Input)
Setting
Weighting
Peak hold
Maximum level display
Response time
Other Function
RT60
Memory
Average calculation
EQ setting value display
Phase checker
Transmission
Noise Generator
(Based on 5VDC power source)
Pink noise
1K Hz Signal
Polarity Signal
Power Source
Dimensions (HxWxD)
Weight (with batteries)
20
Built-in miniature omni direction condenser microphone
XLR jacks for line input and output
160X160 LCD screen with contrast adjustment and back light
Bar graph and digit display
31-band, 0.5dB resolution Center frequencies ISO standard from 20Hz to 20KHz
35 ms, 125 ms, 250 ms, 1 sec
Reverberation time display, up to 30 seconds
10 RTA+ 6 average calculation
Through polarity signal
Simultaneous operation with PC or laptop through USB port
Balanced output, -10 dBu
Balanced output, -10 dBu
Balanced output, -10 dBu
4 x AA batteries (battery life: up to 7 hours with alkaline batteries) or external 6
144.95 x 82.95 x 39.42 mm (5.7"x 3.26"x 1.55")
USB 1.1 interface
30 to 130 dB SPL
-50 to +40 dBu
-52 to +38 dBV
5 mV to 80 V
A, C or Flat
ON/OFF
RESET
For 10 RTA memories
31-band
VDC adapter
354 g (0.78 lbs)
PAA3X