Advertisement
Quick Links
SUN ELECTRIC CORPORATION
Installation Instructions
INSTALLATION OVERVIEW: _____________________________________________
These installation instructions detail the steps necessary to set up and calibrate an MGA-1400
Emissions Analyzer.
PARTS & ACCESSORIES LIST: __________________________________________
PART NUMBER
MGA-1400-4-0
0692-2348-01
0692-2025-01
0692-2040-01
0301-0944-01
0301-0945-01
0403-1441-06
0528-0027-01
0528-1062-01
0669-0220
0787-0035
2161-0023
3988-0255-01
5878-0015
6001-0197-01
7009-1869-01
REQUIRED TOOLS: ____________________________________________________
•
Complete Tool Kit
•
Anti-Static Kit
•
Adjustment Tool (0001-0033)
•
Calibration Gas and Gas Regulator
•
Flow Meter (7009-1731)
INSTALLATION MUST BE PERFORMED
QUALIFIED SUN PERSONNEL ONLY
DESCRIPTION
Final Assembly MGA-1400
Installation Instructions
Operator's Guide
QR Card
Filter Element, 75 Micron
Filter Element, 8 Micron
Screw 8-32x3/8
Printer Ribbon
Printer Paper
Hose, Plastic 1/4"
Leak Check Cap
Exhaust Probe Hanger
Hose Assembly, Exhaust
Cable Ties
AC Power Cable
Probe Assembly, Exhaust
0692-2348-01 (06/03/1997) REV A.
Model:
MGA-1400
Serial "B"
Unit Setup
Page:
1 of 3
BY
QTY
1
1
1
1
1
1
2
1
1
2'
1
2
1
2
1
1
Advertisement
Related Manuals for Sun Microsystems MGA-1400
Summary of Contents for Sun Microsystems MGA-1400
- Page 1 SUN ELECTRIC CORPORATION Installation Instructions INSTALLATION MUST BE PERFORMED QUALIFIED SUN PERSONNEL ONLY INSTALLATION OVERVIEW: _____________________________________________ These installation instructions detail the steps necessary to set up and calibrate an MGA-1400 Emissions Analyzer. PARTS & ACCESSORIES LIST: __________________________________________ PART NUMBER DESCRIPTION...
- Page 2 Press < until "CODE 2" is reached. Press <FUNCTION>; the display will indicate "----". Enter the password that can be found on page iv of the MGA-1400 Service Manual. The display will indicate "SE 0". (SErvice Mode). 0692-2348-01 (06/03/1997) REV A.
- Page 3 Press < until "CODE 3" is reached. Press <FUNCTION>; the display will indicate "----". Enter the password that can be found on page iv of the MGA-1400 Service Manual. The CO2 display should indicate "GC 0". (Gas Calibration mode). ↑>...