Media Playback - Panasonic SC-UX100 Operating Instructions Manual

Media playback

The following marks indicate the availability of the
feature.
: CD-R/RW in CD-DA format or with MP3 files.
CD
: USB device with MP3 files.
USB
: Bluetooth ®
BLUETOOTH
Basic playback
CD USB BLUETOOTH
Play Press [4/9].
Stop Press [8].
USB
The position is memorised.
"RESUME" is shown.
Press again to stop fully.
Pause Press [4/9].
Press again to continue playback.
Skip Press [2/3] or [5/6] to skip track.
CD USB
Press [R, T] to skip MP3 album.
Search Press and hold [2/3] or [5/6].
Note:
Depending on the Bluetooth
not work.
Viewing available information
CD USB BLUETOOTH
You can view the available information, such as MP3
album and track number, on the display panel.
Press [DISPLAY].
Example: MP3 album and track number display.
Album number
Note:
•
Maximum characters that can be shown: Approximately 32
•
This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
• Text data that the system does not support can show
differently.
8
8
device.
device, some operations may
®
Track number
Play menu
CD USB
1
CD
Press [PLAY MENU].
USB
Press [PLAY MENU] to select "PLAYMODE".
2
Press [R, T] to select the setting and then press
[OK].
OFF PLAYMODE Cancel the setting.
1-TRACK Play one selected track.
Press [2/3] or [5/6] to
1
select the track.
1-ALBUM Play one selected MP3 album.
Press [R, T] to select the MP3
1
album.
RANDOM Play all tracks randomly.
RND
1-ALBUM Play all tracks in one selected MP3
RANDOM album randomly.
Press [R, T] to select the MP3
1 RND
album.
ALL REPEAT Repeat all tracks.
1-TRACK REPEAT Repeat 1-TRACK.
1
1-ALBUM REPEAT Repeat 1-ALBUM.
1
RANDOM REPEAT Repeat random playback.
RND
1-ALBUM Repeat 1-ALBUM RANDOM.
RANDOM REPEAT
1 RND
Note:
•
During random playback, you cannot skip to tracks which
have been played.
•
The setting is cancelled when you open the disc tray or
disconnect the USB device.
Link mode
BLUETOOTH
You can change the link mode to suit the connection
type.
Preparation
If this system is connected to a Bluetooth
disconnect it (Z"Disconnecting a device").
1
Press [PLAY MENU] to select "LINK MODE".
2
Press [R, T] to select the mode and then press
[OK].
MODE 1 Emphasis on connectivity.
MODE 2 (default) Emphasis on sound quality.
Note:
•
Depending on the device, the playback image and sound
may not be synchronised. In this case, select "MODE 1".
•
Select "MODE 1" if the sound is interrupted.
device,
®