Advertisement
ALL-AMERICAN PRESSURE STEAM STERILIZER LIMITED WARRANTY
This quality sterilizer is designed and manufactured to provide many years of satisfactory performance under normal use. Wisconsin luminum
Foundry pledges to the original owner that should there be any defects in material or workmanship during the first year after purchase, we will
repair or replace it at our option. This pledge does not apply to damage caused by shipping. To obtain service under the warranty:
1. Return uthorization (R ) Number is required by our company to return any product manufactured by Wisconsin luminum Foundry.
Merchandise returned without an R Number will be refused. To obtain an R Number contact our company by either writing, faxing or calling
our Customer Service Department at 920-682-8627. ll defective merchandise must be returned to our factory before credit or a replacement
will be issued; do not destroy the defective merchandise. ny products returned must include paperwork stating the reason for the return, when
and where the item(s) were purchased, model numbers, quantities, etc., and who to contact with any questions. Prior to return to the factory, all
sterilizers must be cleaned to remove any biological material or contaminants.
2. Return sterilizer, shipping prepaid, direct to:
Wisconsin luminum Foundry Co., Inc.
Consumer Products Division
1931 South 14th Street
Manitowoc, WI 54220
ny alterations, modifications or changes of any type made to the sterilizer or to any component thereof will void this warranty!
We want you to obtain maximum performance from using this quality sterilizer and we ask that you take the time to read and follow the operating
instructions. Failure to follow instructions, damage caused by improper replacement parts, abuse, or misuse will void this pledge. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. This is Wisconsin luminum Foundry's personal
pledge to you and is being made in place of all other express warranties.
WISCONSIN ALUMINUM FOUNDRY CO., INC.
CORRESPONDENCE:
WISCONSIN LUMINUM FOUNDRY CO., INC.
P.O. BOX 246
M NITOWOC, WISCONSIN 54221-0246
PHONE: (920) 682-8627 / F X: (920) 682-4090
email: customerrelations@wafco.com
website: allamerican-chefsdesign.com
or shortcut: aa-cd.co
IMPORTANT — PLEASE READ
RETURN & SERVICE:
WISCONSIN LUMINUM FOUNDRY CO., INC.
CONSUMER PRODUCTS DIVISION
1931 SOUTH 14TH STREET
M NITOWOC, WI 54220
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for All American 1915X
Summary of Contents for All American 1915X
- Page 1 ALL-AMERICAN PRESSURE STEAM STERILIZER LIMITED WARRANTY This quality sterilizer is designed and manufactured to provide many years of satisfactory performance under normal use. Wisconsin luminum Foundry pledges to the original owner that should there be any defects in material or workmanship during the first year after purchase, we will repair or replace it at our option.
- Page 2 OPERATING INSTRUCTIONS Non-Electric Pressure Steam Sterilizers Models 1915X, 1925X, 1941X 1915X 1925X 1941X Gross Volume 15.5 qt. Gross Volume 25 qt. Gross Volume 41.5 qt 14 liter 24 liter 39 liter CAUTION! READ THESE IMPORTANT SAFEGUARDS! 1. Read and understand the instruction instructions before first use and that the unit 15.
- Page 3 Index Alignment Arrow cycles, a white deposit may begin to form on Air Exhaust Tube the bottom of the sterilizer. We recommend #2155-15 (1915X) #2155-25 (1925X) cleaning with a lime remover. Manufacturers of #2155-41 (1941X) coffee makers have cleaning solutions which...
- Page 4 Excess Pressure Relief Valve Overpressure Plug #2050K #1010 Control Valve #65K Air Exhaust Tube #2155-41 Aluminum Inner Container #2164 Rack #151 Machined Water Level Mark Model 1941X shown Figure A...
- Page 5 Excess Pressure Relief Valve Overpressure Plug #2050K #1010 Geared Steam Gauge Control Valve # 72S #65K Air Exhaust Tube #2155-15 (1915X) #2155-25 (1925X) Aluminum Inner Container #2162 (1925X) #2163 (1915X) Rack #111 Machined Water Level Mark Model 1925X shown Figure B...
- Page 6 OPERATION 5. Check to see if your water level inside the Lever vertical Lever horizontal or open or closed sterilizer is correct and then place loaded inner 1. Remove the cover of the sterilizer by turning container inside the sterilizer. the wing nuts in a counter-clockwise motion.
- Page 7 no sound of escaping steam is coming through MAINTENANCE water after soaking in vinegar. the control valve. NEVER ATTEMPT TO OPEN In the event that you are unable to 1. Metal-to-Metal seal (See Fig. 1). We THE STERILIZER UNTIL THE GAUGE READS properly remove any foreign material from your recommend periodically checking the metal- ZERO.
- Page 8 release pressure at 28 PSI. This valve is pushing the round top side into the opening equipped with a deflector cap that will direct from the underside of the cover (See Fig. 7). any steam released in a downward direction. 6.
- Page 9 IMPORTANT STERILIZATION FACTS Steam is an ideal sterilizing PRESSURE GAUGE agent because it kills ACCURACY: The gauges are microbes quickly. A large rated as having an accuracy volume of steam condenses of 3%-2%-3%. This desig- to a very small amount of nates plus or minus 3% of the water d more steam is drawn full span for the first and last...
- Page 10 STEAM STERILIZATION LOG...
- Page 11 Top Handle Screw (New Style only) 630077) Retaining Bayonet Clamp (630090) Bayonet Clamp Screw (670020) Rack (For inside Aluminum Container for 1915X, 1925X) (630110) (9 1/2" Diameter) Rack (For inside Aluminum Container for 1941X) (630120) (11 1/2" Diameter) Side Handle Complete (with screws, for 1941X) (Z000113)
- Page 12 SPECIFICATIONS Model 1925X (25 qt/24 liter) Model 1941X (41 qt/39 liter) Model 1915X (15 qt/14 liter) Gross Capacity 25 qt/24 liter Gross Capacity 41 qt/39 liter Gross Capacity 15 qt/14 liter Overall Height ⁄ " / 42.5cm Overall Height 19" / 48.3cm Overall Height ⁄...
- Page 13 PRESSURE STEAM STERILIZERS FOR YOUR PROTECTION IF YOU NEED TO SHIP THE PRODUCT Complete and mail the attached WARRANTY The product must be sent carefully REGISTRATION CARD immediately so that we may packed (the item must be properly contact you directly in the event a safety cushioned) to prevent damage in notification is issued in accordance with the 1972 transit and should be adequately...
- Page 14 PRESSURE STEAM STERILIZERS This Wisconsin Aluminum Foundry product is warranted against defects in workmanship or material for a period of (1) YEAR from date of original purchase. If the product becomes defective within the warranty period, Wisconsin Aluminum Foundry will repair or replace it at our discretion. This warranty gives you specific legal rights, you may also have other rights which vary from state to state.
Need help?
Do you have a question about the 1915X and is the answer not in the manual?
Questions and answers