MS-7640 Manboard
Front USB Connector: JUSB3
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
USB 3.0 Bracket (optonal)
Important
•
Note that the pns of VCC and GND must be connected correctly to avod possble
damage.
•
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
IEEE1394 Connector: J1394_1
Ths connector allows you to connect the IEEE1394 devce va an optonal IEEE1394
bracket.
1394 Bracket (optonal)
En-18
* The MB layout n ths figure s for reference only.
* The MB layout n ths figure s for reference only.