Advent ADV10PS2 Operation Manual page 14

SOURCE DEFAULT PS2
This allows the user to set the system default source to PS2 (via System Menu).
Note:
• If selected default source is set to PS2 every time the unit's power is cycled with the source set to something other then PS2, the unit will power
up and automatically switch the source over to PS2.
• Unit will be set to Last Memory on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
SCREEN MODE SELECT
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format highlight SCREEN MODE and press MENU/ENTER button to enter the submenu. Then press the
Cursor button or to select from 4:3 or 16:9. Press MENU/ENTER button to confirm the setting.
SYSTEM MENU
PICTURE CONTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT PS2
SCREEN MODE
SYSTEM MENU
PICTURE CONTROL
FMM
OSD LANGUAGE
SOURCE DEFAULT PS2
SCREEN MODE
14
SOURCE DEFAULT PS2
ON
OFF
SCREEN MODE
4:3
16:9