RF Technologies Help Alert User Manual page 4

Important Warnings
It is important for your facility to implement and enforce the following WARNINGS in order to keep
all equipment functioning properly.
INSTALLATION AND CONFIGURATION—It is the responsibility of the facility to follow the
installation instructions carefully and to use the components and supplies specified by RF
Technologies, Inc. for all installations.
Failure to use the components and supplies specified by RF Technologies, Inc. may result in
equipment and/or system failure.
SYSTEM MAINTENANCE AND TESTING—It is the responsibility of the facility to
establish and facilitate a regular maintenance schedule for your system. This includes regular
inspection, testing, and cleaning. RF Technologies, Inc. recommend monthly maintenance
and testing of your system. It is also recommended that your facility keep records of
maintenance and test completions.
Failure to provide regular maintenance and testing of these products may result in equipment
and/or system failure.
SYSTEM INSPECTION—It is the responsibility of the facility to establish and facilitate a
regular inspection schedule for your system. RF Technologies, Inc. recommend quarterly
inspections of your system for safety and performance by a qualified RF Technologies, Inc.
representative.
To arrange for a quarterly inspection by RF Technologies, Inc., call our Technical Support
Department at (800)-669-9946 or (262) 790-1771.
Failure to provide regular inspection of these products may result in equipment and/or
system failure.
USER TRANING—It is the responsibility of the facility to implement structured training
procedures for all employees using the system. Only users who have received adequate training on the
use of the system should use the system.
Failure to adequately train employees may cause system failure due to user error. In addition,
incorrect use of the equipment may also result in system failure.
DISPOSAL—At the end of their service life the products described in this manual, as well as
accessories (i.e. lithium batteries, banding material, disposable pads, etc.), must be disposed
of in compliance with all applicable federal, state and local guidelines regulating the disposal
of products containing potential environmental contaminants. Dispose of the packaging
material by observing the applicable waste control regulations.
PRODUCT WARRANTIES—Failure to follow the Warnings and Cautions in this guide voids any
and all Product Warranties.