Samsung SyncMaster 3 Series User Manual page 23

Basic Features
Backlight / Contrast / Brightness / Sharpness
/ Color / Tint (g/r)
Your television has several setting options for picture quality control.
✎
NOTE
x
When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness.
x
Settings can be adjusted and stored for each external
device connected to the TV.
x
Lowering picture brightness reduces power consumption.
Screen adjustment
Screen adjustment provides various picture size and aspect ratio
options. Select an option using the up and down arrow keys, and
the press ENTErE. Use the arrow keys to select an option in the
sub-menu, and then press ENTErE.
Picture Size: Your cable box / satellite
■
receiver may have its own set of screen sizes
as well. However, we highly recommend you
use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit the
entire screen.
✎
Available with HD 1080i / 720p signals in 16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces of
borders displayed on the left, right and center of the
screen may cause image retention (screen burn) which
are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)
signals are inputted.
Position: Adjusts the picture position. Position is only available
■
if Picture size is set to Zoom1, Zoom2, Wide Fit, or Screen
Fit.
✎
To use the Position function after selecting Zoom1, Zoom2
or Wide Fit, follow these steps:
1. Press the d button to select Position.
2. Press the ENTErE button.
3. Press the u or d button to move the picture up or
down.
4. When done, Press the ENTErE button.
✎
If you want to reset the pictures to its original position,
select reset in the Position screen, and then press
ENTErE. The picture will be reset to its default
position.
✎
To use the Position function after selecting Screen Fit
when connected to an HDMI (1080i/1080p) or Component
(1080i/1080p) source, follow these steps:
1. Press the d button to select Position.
2. Press the ENTErE button.
3. Press the u, d, l or r button to move the picture.
4. When done, Press the ENTErE button.
✎
NOTE
x
If you want to reset the pictures to its original position,
select reset in the Position screen. The picture will be set
to its default position.
x
HD (High Definition): 16:9 - 1080i / 1080p (1920x1080),
720p (1280x720)
x
You can adjust and store settings for each external device
you have connected to an input on the TV.
x
Picture Sizes available by Input Source:
Input Source
ATV, AV, Component (480i, 480p)
DTV(1080i), Component (1080i,
1080p), HDMI (720p, 1080i, 1080p)
PC Screen adjustment
■
✎
Available only PC mode.
x
Coarse / Fine: Removes or reduces picture noise. If
the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (Coarse)
and Finetune again. After the noise has been
reduced, readjust the picture so that it is aligned to
the centre of screen.
x
Position: Adjusts the PC screen position with
direction button (u / d / l / r).
x
Image reset: Resets the image to default settings.
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9, Wide Fit, 4:3, Screen Fit
23
English