Care And Cleaning; Troubleshooting; Limited Warranty - GeekChef GM25B User Manual

Stand mixer
Table of Contents

Advertisement

Recipes: Cheese Cream (maximum x 2 quantity)
• 62g cream cheese at temp. ambient
• 45g butter at temp. ambient
• 1 cups white powder sugar
1.
Use the Whisk, Max speed mix cream and butter until the mixture were mixed
smooth and fully (approximate 40s)
2.
Slow it and adjust speed setting to four, then put white powder sugar into bowl,
3.
Finally set the speed at max speed until the mixture mixed fully (approximately 1
min 20s)

CARE AND CLEANING

WARNING
Before you clean the appliance, unplug it.
Do not immerse mixer, cord, or plug in water or any other liquid.
Refer to the table for information on cleaning the parts with water,
dishwashing machine and/or moist cloth.
CAUTION
Make sure that the cutting edges of the blades and discs do not come into
contact with hard objects. This may cause the blade to get blunt.
The cutting edges are sharp. Be careful when you clean the discs, and
blade units of the food processor, blender.
1.
Clean the motor unit with a moist cloth.
2.
Clean the other parts in hot water(<60℃) with some washing-up liquid or in a
dishwasher.
3.
DISHWASHER-SAFE PARTS: Bowl, Beater, Whisk, Dough Hook, Pouring
Shield.
4.
Store the appliance and accessories in a dry place after cleaning.

TROUBLESHOOTING

9
PROBLEM
PROBABLE CAUSE/SOLUTION
Place liquid ingredients in bowl before adding dry ingredients.
Food is not mixed.
Stop mixer and scrape sides of bowl.
Increase speed.
Food splatters during mixing.
Mixtures containing large amounts of liquid ingredients should be
mixed at lower speeds to avoid splashing. Increase speed only after
the mixture has thickened.
Stand mixer fail to operate.
Is the stand mixer plugged in?
Is the stand mixer head tilted down in place?
Make sure the attachment outlet cover is closed in place.
Stand mixer emit pungent
The stand mixer may emit a pungent oder, especially when new.
This is common with electric motors.
oder.
The stand mixer works too long, reduce working hours.
Stand mixer suddenly stops
Machine overload. Turn off the stand mixer, unplug the power
cord, take out some of ingredients. After the stand mixer is cool
during working.
down, plug in and select the desired speed setting.
The stand mixer will be automatically turned off after 15 minutes of
continuous operation, this can avoid potential safety problems due
to prolonged usage. Rotate speed control to Off (0), then select the
desired speed setting.
If the problem cannot be corrected, contact the customers service: 1-844-801-8880.
Do not return the stand mxier to the retailer; retailers do not provide service.

LIMITED WARRANTY

MANUFACTURER WARRANTY
This GeekChef stand mixer is guaranteed to be free from defects in material and
workmanship for a period of 1 year from the date of purchase by the first user,
given that the unit is used in accordance with the use and care instructions
supplied and for household use only.
EXCLUSIONS
Moving parts such as beater, whish, dough hook, pouring shield, bowl, etc. which
are subject to normal wear and tear are excluded from the warranty. Also
excluded are all defects resulting from accident, damaged suffered in transit,
misuse or negligence, normal wear and tear such as scratches, dulling of the
polish or staining, etc., and repairs or manipulations carried out by unauthorized or
non-qualified personnel.
PROCEDURE FOR WARRANTY REPAIRS OR REPLACEMENT:
If repairs become necessary during the warranty period, please return the unit to:
1275 BLOOMFIELD AVE, FAIRFIELD, NJ 07004, along with the proof of purchase.
After inspection to confirm that the claim satisfies the warranty conditions, the
defective piece will, at the discretion of the manufacturer, be repaired or replaced
free of charge. For spare parts or assistance not requiring the return of the product
itself, please contact our Customer Service Department at 1-844-801-8880
between the hours of 8:30am to 5:00pm EST.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gm25sGm25r

Table of Contents