Optional Attachments; Mixing Guide - GeekChef GM25B User Manual

HOW TO USE
(CONT.)
7 3 8
Plug mixer into wall outlet. When finished, rotate speed
Select desired speed. control to Off(0). Unplug from
outlet.
10 11
Press up on mixer release button. Tilt mixer head up.

OPTIONAL ATTACHMENTS

GeekChef offers a wide range of optional attachments such as the blender, food
processor or mincer that may be attached to the Stand Mixer attachment power
hub as shown here.
ASSEMBLING THE BLENDER
1 2
Always make sure mixer is
Open blender outlet cover.
unplugged and setting control is
set to OFF (0).
ASSEMBLING THE FOOD PROCESSOR
9
Slide out the pouring shield.
12
Remove attachment by pressing
attachment upward as far as
possible. Turn the attachment
clockwise and pull to remove.
3
Insert blender. Turn the blender
clockwise until blender locks into
place.
5
1 2
Always make sure mixer is Open food processor outlet cover.
unplugged and setting control is
set to OFF (0).
ASSEMBLING THE MINCER
1 2
Always make sure mixer is Open mincer outlet cover.
unplugged and setting control is
set to OFF (0).
NOTE
Auto stop
YOUR STAND MIXER WILL BE AUTOMATICALLY TURNED OFF
AFTER 15 MINUTES OF CONTINUOUS OPERATION. THIS CAN AVOID
POTENTIAL SAFETY PROBLEMS DUE TO PROLONGED USAGE.

MIXING GUIDE

NOTE
Before switching on your stand mixer, make sure the knob is at OFF (0)
1.
position and then attach the whisk, beater or dough hook.
2.
Up to 500g of flour plus other ingredients can be processed in the bowl.
3. Follow the recommended quantities, processing time and speed as
indicated in user manual. Do not exceed the suggested processing speed
to avoid damage to the machine.
4.
It is normal that the tool connector will rotated with the gear cover,
during the use of other attachments such as blender, food processor,
mincer, etc.
Make sure the outlet covers on the arm are well locked before using
5.
your stand mixer.
Before you start , make sure that you pick the desired attachment from following
and assemble according to user manual.
3
Insert food processor. Turn the
food processor clockwise until
food processor locks into place.
3
Insert mincer. Turn the mincer
counterclockwise until mincer
locks into place.
6