Parts And Features; How To Use - GeekChef GM25B User Manual

NOTE
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your table blender that can void your
warranty and create the risk of serious injury.
WARNING
Electrical Shock Hazard: This appliance is provided with a polarized plug (on
wide blade) to reduce the risk of electric shock. The plug fits only one way
into a polarized outlet. DO NOT defeat the safety purpose of the plug by
modifying the plug in any way or by using an adapter. If the plug dose not fit
fully into the outlet, reverse the plug. If it still does not fit, have an electrician
replace the outlet.
The length of the cord used on this appliance was selected to reduce the
hazards of becoming tangled in or tripping over a longer cord. If a longer cord
is necessary, an approved extension cord may be used. The electrical rating
of the extension cord must be equal to or greater than the rating of the
appliance. Care must be taken to arrange the extension cord so that it will not
drape over the countertop or tabletop where it can be pulled on by children or
accidentally tripped over.
WARNING
Moving Parts Hazard.
To reduce the risk of personal injury, always unplug mixer before inserting or
removing attachments.
WATTAGE/PEAK POWER INFORMATION
The marked rating of the stand mixer is defined by agency safety standards as
the maximum stabilized power consumption of the stand mixer at high speed
under a loaded condition.
Peak power is an average of the maximum wattage a stand mixer may
consume during initial operation at high speed.
Recycling
The appliance must not be disposed of with household waste, but taken to an
authorised waste separation and recycling centre.
3

PARTS AND FEATURES

Stand Mixer
Mixer Release Button
Speed Control
Bowl
BEFORE FIRST USE: Wash bowl and attachments in warm, sudsy water; rinse
and dry. Always unplug mixer from electrical outlet before inserting or removing
attachments.

HOW TO USE

1 2
Always
make
sure
mixer
is Press up on mixer release button.
unplugged
and
setting
control
is
set
to
OFF(0).
4 5
Place bowl in bowl lock and turn Insert attachment onto attachment
clockwise until bowl locks into shaft and press upward as far
place. as possible. Turn the attachment
counterclockwise, hooking
attachment over pin on shaft.
Dough Hook Beater Whisk
Pouring Shield
3
Tilt mixer head up.
6
Slide the narrow section of the
pouring shield under mixer
attachment.
4