Advertisement
6. Eco Button:
When the unit is in ECO mode, the
light will turn on. In ECO mode, the unit will
turn-off once the room is cooled to the user set
temperature. The fan will also be off at this point.
The unit will turn back on when the room
temperature rises above the user set temperature.
Before the compressor stars, the fan motor will
run for a while, then it will stop for a while-and will
repeat to provide a much more comfortable-feeling
and save energy.
7. Sleep Button:
Press the SLEEP button, the Sleep
Light will be on after 10s. and the remaining lights
on the display will be off. In SLEEP mode, the air-
conditioner will automatically adjust the
temperature and fan speed to make the room more
comfortable during the night. The set temperature
will automatically raise by 1
minutes and at most change six times until the set
temperature is 28
Run time will depend on set temperature.
8. Fan Speed Button:
to select the fan speed. In COOL MODE you can
choose the following settings: HI, MED, LO, or
AUTO. In FAN MODE you can choose from HI,
MED, and LO.
9. Fiter Button:
The Filter Check light will only turn
on as a reminder to clean the filter after the fan
motor has been in operation for a total of 500
hours. To turn the light off, press the Filter Check
button.
every 30-60
.
Press the FAN SPEED button
10.
Directional Louvers:
to control horizontal airflow and the air deflectors
to control vertical airflow.
air deflector
14
Use the horizontal wheels
horizontal wheel
air deflector
Advertisement
