Canon BW iR Security Kit-A2 Installation Procedure page 15

information to the master machine. Select Additional
Functions>System Settings>Device Information
Delivery Settings>Register Destinations.
(2) Register destinations manually/automatically. In
the case of auto-search, select destinations from
search results, and press OK.
(3) Check settings status of destinations to see if the
master machine can send device information to slave
machines.
(4) Make manual delivery settings. Make the settings
when slave machines are not used on the network/
Local UI.
(5) Select Additional
Settings>Device
Settings>Transmitting
Delivery. Set target information for delivery to ON
from Add. function settings value, Dept. ID, and
Address Book, and press Next.
If address book is selected, forwarding settings and
favorites button settings are also delivered.
(6) Select destinations, and press Manual delivery
start. Device information will be delivered to the
specified slave machines. Check delivery results after
delivery.
Backup of MEAP applications
If any of MEAP applications is already installed, data
and a license stored in the MEAP application is
deleted. However, you don't need to consider it if
MEAP applications are not installed.
If a MEAP application has the backup function, be
sure to backup data specific to the MEAP application
using the function. For licenses, it is necessary to stop
all applications from SMS (Service Management
Service), disable the licenses, and download the
disable license files.
MEAP backup function using SST
Concerning data backed up with MEAPback of SST
before starting the security kit, it must not be re-
written to the iR machine after the security kit starts to
Functions>System
Information Delivery
and Settings>Manual
run. Also, if data backed up after the security kit starts
to run is re-written to an iR machine that the security
kit is yet to run, it does not work properly. It is
absolutely necessary to match operating conditions of
the security kit before and after backup work. For that
reason, backup is impossible with the MEAP backup
function while installing the security kit.
The following procedures are for stopping MEAP
applications, disable licenses, and downloading
license files. Refer to the MEAP SMS Administrator
Guide for details.
Stopping/Disabling
Downloading license files, Uninstalling MEAP
application.
(1) Select the following URL to access SMS.
http://[Device IP Address]:8000/sms
The default password is "MeapSmsLogin." If the user
has changed the SMS password, ask him/her to
change it to an appropriate one after the start of
security implementation.
SMS password will be initialized after the security kit
starts to run.
Therefore, be sure to ask user to change a password.
(2) Select the radio button of an application to be
stopped from the Application list page, and click stop.
(3) Click name of application that a license is
Installed, and access the Application License
Information page.
(4) Click License Management, and click Disable.
Click OK on the Disable license file confirmation
screen.
(5) Click download from Download/Delete Disabled
License File.
Specify a storage location of a file according to
indications on the screens. At this time, name the file
to easily identify an application and its disable license
file.
Chapter 1
MEAP applications,
7