Remote Management - ActionTec GS204AD9-01 User Manual

After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.

Remote Management

Selecting Remote Management in the "Advanced Configuration" screen generates
the "Remote Management" screen. Remote Management allows access to the
Gateway through the Internet via another computer. Actiontec recommends leav-
ing the Remote Management Off (the factory default setting).
To access the Gateway from the Internet, activate Remote Management by selecting
On and writing down the
On a computer outside of the network, open a Web browser and enter the
Gateway's address in the address text box. The Gateway's Main Menu (or a
WAN IP
password prompt, if a password has been set) appears in the browser window.
Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, go to the Basic Setup
screen and select Change Admin Password. Follow the instruc-
tions in the subsequent screens
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
Chapter 5 Advanced Setup
address of the Gateway (see "
WAN IP
45
Address").
WAN IP