Advertisement
Chapter 1
1.3 Installation procedure
1.3.1 Installation
1. Turning Off the iR Machine
Turning Off the Main Power
When turning off the main power, be sure to go
through the following in strict sequence to protect the
machine's hard disk:
1. Hold down on the power switch on the control panel
for 3 sec or more.
2. Operate on the touch panel according to the shut-
down sequence indicated so that the main power
switch may be turned off.
3. Turn off the main power switch.
4. Disconnect the power cable (for the power outlet).
[1]
[2]
2. Installation
4
0009-2019
O N
F
O F
[3]
[4]
F-1-2
1) Open the cable clamp [1], and detach the reader
communication cable [2].
[1]
2) Remove the 6 screws [1], and detach the upper rear
cover [2].
[2]
3) Remove the 4 screws [1], and detach the main
controller box cover [2].
[2]
F-1-3
[1]
[1]
F-1-4
Advertisement
