Asus WiFi-g User Manual page 31

3. The WiFi-g™ scans the
available access point(s) and
wireless devices within its
operating range. Select a
wireless device [
list, then click Next. The wizard
connects the WiFi-g™ to the
selected wireless device.
The window design
changes from Wireless LAN
to Ad Hoc when you
highlight a wireless device
from the list.
4. The wizard displays whether the
WiFi-g™ is connected to the
selected wireless device.
If no connection is established,
click the Back button to scan
other wireless device(s), then
repeat the process.
If connection is established,
click Next to configure the
TCP/IP settings.
5. Configure the WiFi-g™ TCP/IP
settings, then click Finish to
close the wizard.
In an Ad-hoc network, you must specify the WiFi-g™ IP address
manually. Make sure that the IP address of the WiFi-g™ is on the
same sub-domain as that of the wireless device to establish
connection (e.g. If the wireless device IP is 192.168.0.1, then the
WiFi-g™ IP must be 192.168.0.X, where X = 2 ~ 255).
ASUS WiFi-g™ onboard wireless solution
] from the
3-9