Installation; System Requirements; Installing The Antenna - Asus WiFi-g User Manual

2.1

Installation

2.1.1 System requirements

Before installing the WiFi-g™ drivers and utilities, make sure that your
system meets the following requirements.
• ASUS motherboard with onboard WiFi-g™ solution*
• Intel ® Pentium™ 4
AMD Duron; Athlon™XP/64/64FX; Opteron™ system
• Minimum 64MB system memory
• Operating system
Station mode
AP/wireless bridge mode : Windows
• Optical drive for utilities and driver installation
*Visit the ASUS website for an updated list of motherboards with
onboard WiFi-g™ wireless LAN adapter.

2.1.2 Installing the antenna

The WiFi-g™ wireless solution comes with an omni-directional and
moveable dipolar antenna to maximize the WiFi-g™ coverage.
To install the antenna:
1. Locate the wireless LAN atenna
port on the motherboard rear
panel.
2. Connect the antenna twist-on
connector (female) to the
wireless LAN antenna port
(male).
3. Place the antenna at an
elevated location to receive or
transmit better signal.
2-2
: Windows ® 2000/XP/Server 2003
®
XP/Server 2003
Chapter 2: Card installation