Limited Warranty - Recon Outdoors HS410 User Manual

6.2.3 Night Vision Flash Range Does Not Meet Expectations
1) Four (4) AA batteries will not support the camera's night vision ability; ensure that 8 AA batteries are installed.
2) Batteries must be fully charged or have enough power for operation of the LEDs.
3) Adjust Night Mode to Max Range for best night vision flash range.
4) High-quality 1.5V rechargeable AA batteries or lithium batteries will provide optimum IR flash range
performance. Alkaline batteries may not deliver enough amperage to power the IR illuminator consistently at
night.
5) To ensure accuracy and quality of night time images, mount the camera away from any obvious light sources.
6) Certain surroundings (like trees, walls, ground, etc.) within the flash range will provide better night time images.
Aiming the camera toward a totally open area, where there is nothing to reflect back, tends to result in less flash
range and lower quality images.
6.2.4 Camera Location Seems to be Susceptible to False Triggering
1) Make sure the camera is not aimed at the sun. False triggers can be generated by the infra-red (IR) energy
from the sun. This is particularly true at sunrise or sunset and during heat from the mid-day sun.
2) Check the "Sensor Level" (PIR sensitivity) parameter setting. For warm environmental conditions, set the
Sensor Level to "High" and for cold weather use, set the sensor for "Low".
3) Try to set your camera up in an area where there is not a heat source in the camera's line of sight.
4) Try to avoid setting the camera up on small trees that are prone to being moved by strong winds.
5) Remove any limbs or other vegetation that are in front of the camera lens.

7. Limited Warranty

Pentar, LLC ("Recon Outdoors") warrants the original retail purchase that product(s) made by Recon Outdoors and
related Recon Outdoors accessories (individually a "Product" and collectively the "Products") that were purchased
directly from Recon Outdoors or an authorized will be free from defects in materials and workmanship under normal
use and service for a period of one year from the date of initial retail purchase. If any Product proves to be defective,
the customer must return the defective product to the address listed below, following the procedure set forth below.
However, it is recommended that the customer first call Recon Outdoors' Consumer Service Department at
1-800-647-3266, to attempt to determine the nature of the problem. Recon Outdoors, at its sole discretion, will repair,
replace, or adjust the defective Product, provided that Recon Outdoors investigation and factory inspection disclose
that (a) such defect developed under normal and proper use and (b) the Product is covered under this limited
warranty. Repair, replacement, or adjustment of defective Products shall be Recon Outdoors' sole obligation and the
customer's sole remedy hereunder. The customer shall pay for shipment of the Products to the Recon Outdoors
Service Center. When service is completed, the Product will be returned to you via ground service freight prepaid.
Recon Outdoors shall not be obligated to perform preventative maintenance, installation, de-installation, upgrades,
- 17 -