Recon Outdoors HS410 User Manual page 16

Sets a time the camera will automatically capture a photo between 3 seconds to almost 24 hrs.
Time Lapse
Select "ON", press "OK" to set the interval. The PIR sensor will be turned off.
Configurable interval: 00:00:03 to 23:59:59.
Caution: Do not turn on Time Lapse and Delay simultaneously!
Timer Select "ON", press "OK", to set the beginning time and end time (hour/minute). The camera will
only operate during the time period set.
⚫ Other
Language Default setting is English.
Date/Time Month: day: year; hour: minute: second (time is entered in 24-hour format); press "OK" to save.
Caution: Date/Time must be set to ensure some camera functions will work as expected.
Stamp
Sets the camera to imprint camera ID, moon phase, temperature, date, and time onto the
bottom of captured photos.
Select ON or OFF; then press "OK" to save.
Battery Type Choose the battery type being used to ensure optimum camera performance.
Alkaline (for alkaline or lithium); or Ni-MH (for rechargeable); then press "OK" to save.
Frequency Sets the camera frequency for video capture to avoid screen flicker.
televisions use 60Hz frequency rates.
50Hz or 60Hz (select 60Hz for North America); then press "OK" to save.
SD Cycle When turned ON, the camera will delete the oldest photos/videos when SD card becomes full.
Select ON; then press "OK" to activate the SD Cycle feature.
Reset This feature resets all camera settings to original factory defaults (see Section 1.3).
Select Yes; then press "OK" to reset camera settings to factory defaults.
- 13 -
North American