Specifications - Snapper RZT185380BVE Operator's Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
ENGINE:
18.5 HP* Briggs & Stratton
Make Briggs & Stratton
Model 18.5 hp Intek
Horsepower 18.5 @ 3400 rpm
Displacement 30.59 Cu. in (501 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 52 oz. ( 1.5L) w/ Filter
20 HP* Briggs & Stratton
Make Briggs & Stratton
Model 20 hp Intek
Horsepower 20 @ 3500 rpm
Displacement 40.0 Cu. in (656 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 64 Oz. (1.9 L) w/ Filter
20 HP* Kohler
Make Kohler
Model 20 hp Courage
Horsepower 20 @ 3600 rpm
Displacement 36.4 Cu. in (597 cc)
Electrical System 12 Volt, 15 amp. Alternator, Battery: 230 CCA
Oil Capacity 51 Oz. ( 1.5L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 3.0 Gallons (11.4 L)
Rear Wheels Tire Size: 18 x 6.50-8 (38" Deck Models)
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00-5
Inflation Pressure: 25 psi (1,72 bar)
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be lower and is
affected by, but not limited to, ambient operating conditions and engine to engine variability. Given both the wide array
of products on which engines are placed, and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual
"on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions
(temperature, humidity, altitude), and engine to engine variability.
18 x 8.50-8 (42" Deck Models)
TRANSMISSIONS:
Hydro-Gear
ZA-DHBB-2D5A-2DCX (LH)
ZA-AHBB-2D5A-2DCX (RH)
Type EZT
Hydraulic Fluid Sealed Unit
Speeds Forward: 0-6.2 MPH (0-9.98 km/h)
@ Specified rpm Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque 115 ft. lbs. (155 N.m.)
Output
Maximum Weight 340 lbs. (154 Kg) per Axle
on Axle
DIMENSIONS:
Overall Length 72" (182,9 cm)
Overall Width
With 38" Mower Deck 49" (124,5 cm)
With 42" Mower Deck 52" (132,1 cm)
Height 38" (96,5 cm)
Weight (apx.)
With 38" Mower Deck (Simplicity)
With 38" Mower Deck (Snapper)
With 42" Mower Deck
33

Specifications

520 lbs. (236 kg)
500 lbs. (227 kg)
540 lbs. (245 kg)