Dell EqualLogic FS7610 Series Hardware Owner's Manual page 23

Dell EqualLogic FS7610 Hardware Owner's Manual 2 Replacing Components
3. Press the fan release tabs (Figure 15 callout 1) and pull the cooling fan out of the NAS appliance chassis
(callout 2).
Figure 15: Removing a Cooling Fan
Installing a Fan
1. Align the plug at the base of the cooling fan with the connector on the system board.
2. Slide the cooling fan (Figure 16 callout 2) into the securing slots until the tabs (callout 1) lock into place.
Figure 16: Installing a Cooling Fan
3. Close the cooling fan access door.
4. If applicable, install the front bezel.
17