Advertisement
1 2 3 4 5 6 7 8 9 1 0
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
WIRELESS CALL SYSTEM
1 2 3 4 5 6 7 8 9 1 0
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
WIRELESS CALL SYSTEM
1 2 3 4 5 6 7 8 9 1 0
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
WIRELESS CALL SYSTEM
1 2 3 4 5 6 7 8 9 1 0
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
WIRELESS CALL SYSTEM
To add an additional Nurse Call Button or other component to your system:
1.
Press and hold the "Replace/Add" Button until you hear two dings and a melodic tone.
2.
Press the "Record/Add" Button once. Wait for two dings. After the second ding, press and release the Nurse Call
Button, apply pressure to the pad being programmed, turn a motion sensor on, or touch the parts of an Exit Alarm
Wait for a melodic tone
together.
The Central Monitor should speak and display the channel that the new component has been programmed to.
Refer to previous pages for programming directions specific to each component.
3.
Press the "Reset" button to exit programming mode.
4.
Test the system with the new Nurse Call Button or other new component.
WARNING: If you do not wait for the Central Monitor to make a melodic tone before pressing the next Nurse Call Button or other
component, each component will be programmed to the same number on the Central Monitor. In this situation, the Central Monitor will
speak one number for the component, but show a different number to represent the room. When multiple components are programmed
to the same number on the Central Monitor, THE NUMBER SPOKEN WILL NOT CORRESPOND WITH THE NUMBER DISPLAYED. This may
be useful when multiple devices are being used in the same room, but not for any other situation.
To replace an existing Nurse Call Button or other component with a new Nurse Call Button or other component:
1.
Press and hold "Replace/Add" Button until you hear 2 dings and a melodic tone.
2.
Repeatedly press the "Call Review" Button to scroll through the numbers on the Central Monitor until you get to
the number of the Nurse Call Button or other component that you would like to replace. Press the new Nurse Call
Button or other new component. Central Monitor will ding when new Nurse Call Button or other new component
has been accepted. Refer to previous pages for programming directions specific to each component.
3.
Press "Reset" button to exit programming mode.
4.
Test system with new Nurse Call Button or other new component.
CALL REVIEW
VOLUME
Call Review
LANGUAGE
REPLACE/ADD
RECORD/ADD
RESET
CALL REVIEW
VOLUME
LANGUAGE
Volume
REPLACE/ADD
RECORD/ADD
RESET
CALL REVIEW
VOLUME
LANGUAGE
REPLACE/ADD
Language
RECORD/ADD
RESET
CALL REVIEW
VOLUME
LANGUAGE
REPLACE/ADD
RECORD/ADD
Replace/Add
RESET
before programming any additional Nurse Call Buttons or other components.
Call Review Button
Press once to silence the Central Monitor without erasing
call memory.
Press to review recent calls - press repeatedly to scroll
through last 6 calls.
Volume Button
Controls the volume of the Central Monitor - press
repeatedly to scroll through 3 volume options
Language Button
Controls the language of the Central Monitor - press
repeatedly to scroll through 11 language options (English,
French, German, Dutch, Spanish, Italian, Portuguese, Russian,
Japanese, Cantonese and Mandarin) and 3 tone options.
Replace/Add Button
Use this button when you wish to:
1.
Add an additional Nurse Call Button or other component
to your system.
2.
Replace an existing Nurse Call Button or other component
with a new Nurse Call Button or other component.
Advertisement
