How To Schedule The Robot - Hkoenig SWRC90 Operation Manual

3. Scheduling
You can schedule the robot to set it to start cleaning automatically at a certain time every day.
Note: The robot can only be set when it is in standby or charging mode. If the robot is in sleep mode,
press " " on main body or ON/OFF button on remote control to wake up the robot. If the robot is in
cleaning mode, stop it before scheduling.

How to schedule the robot

A. Setting robot clock
a. In standby or charging status, press "
current system time. Then the left two numbers on LED panel will flash.Press "
increase hour or "
b. Press " " to enter minute-setting mode, the right two numbers on LED panel will flash.
Press "
c. Press " " gain to save the setting, then press "
press "
B. Setting the scheduling time
a. In standby or charging status, press "
then the left two numbers on LED panel will flash, press "
" " to decrease it.
b. Press " " to enter minute-setting mode, the right two numbers on LED panel will flash, press
" " to increase it or "
c. Press " " gain to save the setting, then press "
press "
C. Cancel the scheduling
Set the scheduling time to 00:00.
Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
" to decrease it.
" to increase it or "
" to exit, the current setting will be invalid).
" to decrease it.
" to exit, the current setting will be invalid).
" to start clock-setting. the LED panel will show the
" to decrease it.
" to exit (Before the setting is saved, if
" and hold it for 3 seconds to start scheduling,
" to exit (Before the setting is saved, if
11
" to increase hour or
" to