Stack-On QAS-1512 Instructions page 4

SELECTING A LOCATION
e safe must be mounted to a shelf . For optimal
safety and security, the safe should be installed in
an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE: is safe must be mounted to a shelf.
Failure to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE:
needs to be in an upright position, as shown in
gure 1, for the locking mechanism to function
properly. Failure to mount the safe in the
corrrect upright position will compromise the
safety and security of the safe.
Figure 1
e safe
QAS-1545
QAS-1512
Secure the safe to a shelf using the predrilled
mounting holes in the safe and hardware provided.
Place the safe in the desired location and mark the
mounting holes to be used with a pencil. Move the
safe and drill the pilot holes for the screws. For
mounting to a shelf, drill 3/16" diameter pilot holes
and a ach the safe using the 3/4" screws and
washers. (Figure 2)
Figure 2
QAS-1545
QAS-1512