Optimizing The Image - BenQ PB8263 User Manual

Optimizing the image

To optimize the image, use the buttons on the projector or remote control to adjust the
image settings directly, or to change the settings on the On-Screen Display (OSD) menus.
For the operation of OSD menus, refer to
The following instructions are optional. You do not need to follow every step. It depends on
the image quality you desire.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the projection angel
of the projector, you will need to manually correct it
following ONE of these steps.
• Press Left/
remote control to display the status bar labelled
Keystone. Press
the top of the image. Press
keystoning at the bottom of the image.
• Press MENU on the projector or remote control.
Go to
values by pressing
projector or remote control.
For example,
Keystone
Keystone
34 Operation
Right on the projector or
Right to correct keystoning at
Left to correct
Display > Keystone and adjust the
Left/ Right on the
1. Press Right on the projector or remote
control or
2. Press Right on the projector or remote
control when you are in the Display >
Keystone menu.
0
1. Press Left on the projector or remote
control or
2. Press Left on the projector or remote
control when you are in the Display >
Keystone menu.
0
"Using the menus" on page 42.
Keystone
-6
Keystone
+6