AOpen 24MX1 User Manual page 25

2. Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
8. OSD Lock:To choose OSD lock
---------------------------------------------------------------------------------------------------------
Note:
OSD Locked:
•
•
•
•
OSD Unlocked:
•
•
•
System
Mode - User
Picture Input
Color
Auto Source
Audio
Wide Mode
Gaming
Hot Key Assignment
OSD
DDC/CI
HDMI Black Level
System
Quick Start Mode
Information
1. Press the MENU key to open the OSD.
2. Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.
on/off.
Set the OSD Lock to "On" by the OSD option and press "Enter" to
execute the All Key lock function.
The "OSD Locked" message will be displayed in the middle of the
screen.
LED lights will be changed from blue light to orange light.
Press any Key screen to prompt "OSD Locked" message.
In normal display condition to press the any key (Not included
DC power) in the middle of more than 3 seconds to trigger "OSD
Unlock".
The "OSD Unlock" message will be displayed in the middle of the
screen.
LED lights will be restored to blue light.
HDMI
On
Full
On
Normal
Off