Ce Conformity; Disposal; Maintenance - Profitec Pro M54 Instruction Manual

Problem
The grinder motor is working, but
no ground coffee is falling out of
the spout.
The grinder motor produces a
humming sound, does not
operate, does not grind any
beans.
Grind cannot be adjusted.
Sparse coffee dispensing from
the espresso machine,
only drop by drop
Little or no crema on top of the
coffee
Foam instead of crema
8

CE CONFORMITY

Conformity
This product complies with the following directives / standards:
IEC 60335-1(ed5) +A1 +A2
IEC 60335-2-64:2002 +A1 +A2
EN 60335-1:2012 +A11 +A12 +A13
EN 60335-2-64:2000 +A1
EN 62233:2008
EN 55014-1:2006 +A1 +A2
EN 55014-2:1997 + A1 +A2
EN 61000-3-2:2014
EN 61000-3-3:2013
9

DISPOSAL

WEEE Reg. No.: DE97592029
This product complies with EU Directive 2012/19/EU and is registered according to WEEE (Waste Electrical
and Electronic Equipment).

10 MAINTENANCE

Any repairs or changes of components must be carried out by an authorised specialty dealer.
If your burrs have to be replaced (usually after grinding 250 kg of coffee), please contact your authorised
specialty dealer.
Bedienungsanleitung / Instruction manual ProM54
Possible Cause
The lock slide of the bean hopper
is closed.
The coffee shaft is blocked with
coffee powder.
The grind is too fine: The grinding
burrs touch and mutually block
each other.
The coffee shaft is blocked with
coffee powder. The coffee is
blocking the motor.
Thread is blocked with coffee.
The grind is too fine
There is too much ground coffee.
Too much tamping pressure
The grind is not fine enough.
The coffee is old.
The shower screen is dirty.
Ambient and humidity conditions
have changed.
The coffee beans are improper
The setting of the coffee grinder is
not suited for the coffee mixture in
use
16
Troubleshooting
Open the lock slide of the bean
hopper.
see instructions above.
Adjust the grind to a coarser
degree.
Clean the coffee shaft, adjust the
grind to a coarser degree.
Clean the thread.
Adjust the grind to a coarser
degree.
Use less ground coffee.
Reduce grinding time.
Use less pressure when tamping.
Adjust the grind to a finer degree.
User more pressure when
tamping.
Use fresh coffee.
Clean the shower screen.
Adjust the grind accordingly.
Use another coffee bean.
Adjust the coffee grinder (When
changing the coffee beans,
changing
the grind may also be necessary.)