Regular Maintenance; Maintenance Schedule - Snapper GT600 Operator's Manual

MAINTENANCE SCHEDULE

The following schedule should be followed for normal care of your tractor and mower.
SAFETY ITEMS
Check Safety Interlock System
Check Tractor Brakes
Check Mower Blade Stopping Time
TRACTOR MAINTENANCE ITEMS
Check Tractor/Mower for Loose Hardware
Clean Debris Out of Engine Compartment
Clean Radiator **
Clean Transmission Oil Cooler
Check Transmission Oil Level
Change Transmission Oil & Filter ***
Check Front Transaxle Oil Level (4WD Only)
Check Mower Gear Box Oil Level
Check Tire Pressure
Clean Battery & Cables
Lubricate Tractor & Mower **
Clean Deck & Check/Replace Mower Blades**
ENGINE MAINTENANCE ITEMS
Check Engine Oil Level
Check Engine Coolant Level (Liquid Cooled)*
Change Engine Coolant (Liquid Cooled)*
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Drain Fuel Separator (Diesel Models)*
* Refer to engine owner's manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** Service after the first 50 hours of operation, then every 250 hours of operation.
Before Every 5 Every 25
Each Hours Hours
Use
• •
• •
•
25
Regular
Maintenance
Every 100 Every 250
Hours Hours
•
•
•
•
•
•
•
•
•
•
Spring &
Fall
•
•
•
•
•
•