The Problem Solver - Hotpoint WLW2500B Use And Care Manual

The Problem Solver

PROBLEM
KNITS
PERMANENT PRESS
AND "NO-~ON"
ITEMS
(continued)
I
POSSIBLE CAUSEANDmMEDY
is gradually removed by laundering. Maybe naticed in older garments that have been
shaped. When washing, drying or ironing temperatures exceed the temperatures used
to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by
washing in cool or warm water; drvin~ on Low or Delicate heat.
Too many clothes in dryer. Dry ody one washer load at a time. Do not combine loads.
clothes, with
lighter Permanent Press items such as shirts or blouses. Do not wash
Permanent Press with regular laundry.
regular loads. . . no more than medium loads to give clothes room to move freely.
Incorrect wash and dry cycles. Use Permanent Press Wash cycle which provides a
* bcorrect water 1evel. Use High Water Level for Medium Load, Medium Level for
Small Load.
of dete~ent.
non-phosphate detergent, avoid the use of high-carbonate-built detergent.
To remove
wrinkles:
1. Retumb]eon "Permanent Press" setting.
3. If unsuccessful, retumble onhighheat for IOto ~ minutes and hag irnmediateIy.
4. fioncarefully,
5. Send to dry cleaners for pressing.
6. Some wrirddes may remain which cmnot be removed.
caused when stnrch or stiing (in some fabrics)
in certain hit fabrics that have been heat-
20