Wiring And Powering Readers; Wiring And Powering 12Vdc Door Strikes And Maglocks - IEI Technology eMerge MicroNode Extreme Quick Start Manual

Wiring and powering readers

Pwr
Gnd
Grn
LED
Bpr

Wiring and powering 12VDC door strikes and maglocks

Any output can be used for powering 12V strikes or maglocks. If output 1 or 3 is selected you
must set the strike switch in the NORM position. Wires must be a minimum of 20 AWG.
2
D0
reader 1
D1
Red
LED
Reader connectors on the Top board.
Red LED
reader 2
Grn LED
Bpr
D1
D0
Gnd
Pwr
April 13, 2009