BenQ PB7230 User Manual page 34

LED
Power Temp
O O
O
-
O -
G
-
O
-
G
-
- -
- -
R R
R R
R R
30 Maintenance
Lamp
Power events
Power switch on
O
Power-up cooling. The projector needs 90 seconds to cool down
as it was abnormally shutdown without the normal cooling
-
dowm sequence.
Stand-by mode.
-
Lamp LED is blinking during powering up.
-
Power-down cooling for 90 seconds after power has been turned
off.
-
Normal operation
-
Lamp events
It is warning you that lamp usage has exceeded 2000 hours.
R
Replace the projection lamp with a new one immediately.
The lamp is not properly attached or the lamp is damaged.
Please contact your dealer for assistance.
R
Thermal events
The projector will shutdown automatically. If you re-turn on
- the power, the projector will shutdown again. Please contact
your dealer for assistance.
The projector will shutdown automatically. If you re-turn on
G the power, the projector will shutdown again. Please contact
your dealer for assistance.
The projector will shutdown automatically. If you try to restart
G
the projector, it will shutdown again. Please contact your dealer
for assistance.
Status & Description