Kelley aFX-C User Manual page 17

1. Wait until a vehicle is in position against the dock
bumpers.
2. Tell vehicle driver "your vehicle must stay at the dock."
3. Chock or hitch vehicle.
4. If necessary, remove end loads with the ramp in the dock
level (stored) position. See Fig. 24.
noTe:
If the vehicle is to be serviced for a below dock end load, see
operation instructions for Below Dock Control on page 19.
5. To extend the dock leveler lip into the vehicle:
5.1 Push and hold the control button. The ramp will rise
until it stops at its highest position. See Fig. 25.
5.2 Release the control button when the ramp reaches its
highest position.
5.3 Ramp will lower and lip will extend until the lip rests
on the vehicle platform. See Fig. 26.
March 2014 6004752K — aFX-C Dock Leveler — Safe
operaTion,
Fig. 24
Fig. 25
Lip Extend
Vehicle Bed
Fig. 26
T
Frame
®
continued
Dock Level
Supports
Ramp
Push to Raise
©2014 4Front Engineered Solutions, Inc.
17