Support ............... 23 Turning the Unit On and Off ............12 Setting the Source Mode .............12 Adjusting the Volume ..............12 Using Bluetooth Mode ..........13 ® Pairing a Bluetooth Device ............13 ® NFC One-Touch Setup ..............13 During Playback ................14 Page 2 Naxa Electronics...
You may also find the latest FAQ, documentation, and other product material at our website. Come visit • Instruction Manual us on the web at www.naxa.com and see all that we • Remote Control with CR 2025 button cell have to offer! •...
Included wall mounting kit (2 screws, 2 drywall could produce a potential heat hazard. plugs) • Pencil • Level • Ruler WALL • Drill with 7/32” bit (for drywall installations only) • Hammer (for drywall installations only) • Cross-head screwdriver Page 4 Naxa Electronics...
Page 5
Naxa Electronics recommends that wall mounting be 2. For drywall installations only; for wood, skip to performed by a qualified professional installer. Naxa step 3: Use the drill with a 7/32” bit to drill a hole at is not liable for any accidents or damage to property the two marked points on the wall.
Page 6
22.13 inches 1.8A OPTICAL IN AUX 1 ⚠ ⚠ The wall that the sound bar is mounted on should be of sufficient strength to support the weight of the sound bar. Page 6 Naxa Electronics...
– Volume down Volume up SOURCE Press to change the active connection mode (Bluetooth, Optical In, AUX 1, AUX AUX 2 AUX 2 mode. 3.5mm stereo connection connector for devices with 3.5mm line-out or head- phone output. www.naxa.com Page 7...
Page 8
Optical In mode. Digital optical audio Power Connector for the included power adapter. connector connection for devices with optical audio socket output. AUX 1 AUX 1 mode. RCA stereo connection for connector devices with red and white RCA left/right audio output. Page 8 Naxa Electronics...
(Bluetooth mode). Equalizer. Press to change the audio equalizer preset stat VOL– Volume down. Press to decrease the volume level. VOL+ Volume up. Press to increase the volume level. BASS– Bass down. Press to decrease the bass level. www.naxa.com Page 9...
Always dispose of batteries according to your local municipal regulations. ⚠ ⚠ The batteries used in the remote control may present a fire or chemical burn if mistreated. Do not recharge, disassemble, Page 10 Naxa Electronics...
4. Do not charge a battery that is not designed for charging. Do not handle the power plug with wet hands. Doing so may cause electric shock. Do not use the adapter with any other power source. www.naxa.com Page 11...
The SOURCE LED [2] will light to indicate which mode has been selected when SOURCE [6] is pressed. Source LED Connection Mode Blue Bluetooth ® Purple Optical In audio input [8] Page 12 Naxa Electronics...
NFC One-Touch Setup you need help with this step.) Select the sound bar NHS-2006 when the device finds it. If the device If you have a device that is equipped with NFC and prompts you for a pass code, enter “0000”.
During Playback • Press the button to stop playback. Press again to resume playback. • Press the button to skip to the next track; press to skip to the previous track Page 14 Naxa Electronics...
2. Turn on the unit. Press the SOURCE button until the indicator turns green. Start playback on the source device. ⚠ If there is no sound or if the volume is not loud enough, try increasing the volume on the source device www.naxa.com Page 15...
2. Turn on the unit. Press the SOURCE button until the indicator turns orange. Start playback on the source device. ⚠ If there is no sound or if the volume is not loud enough, try increasing the volume on the source device Page 16 Naxa Electronics...
PCM format, only. Optical Out of TV/DVD/Etc. (referred to as OPTICAL OUT “Digital Out” on some devices) Optical Cable (not included) 1.8A OPTICAL IN AUX 1 Optical in jack on the rear panel of the Sound Bar www.naxa.com Page 17...
9. Ventilation: Slots and openings in the cabinet are provided for ven- • To prevent fire or shock hazard, do not expose this appliance to rain tilation to ensure reliable operation of the product and to protect it or moisture. Page 18 Naxa Electronics...
Page 19
16. Power Lines: An outside antenna system should not be located in the specified by the manufacturer. vicinity of overhead power lines or other electric light or power cir- cuits, or where it can fall into such power lines or circuits. When in- www.naxa.com Page 19...
Page 20
Unauthorized substitutions may result in fire, electric shock, or try to correct the interference by one or more of the following measures: other hazards. Page 20 Naxa Electronics...
Page 21
Consult the dealer or an experienced radio/TV technician for help. CAUTION ON MODIFICATIONS Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment. www.naxa.com Page 21...
Please refer to this guide before requesting service. working exhausted If you need further assistance, please contact Naxa AUX 1 / AUX 2 Wrong source is Press source button Technical Support (www.naxa.com/naxa_support/). not working...
10W RMS the instructions in this manual. Please also visit us Input Bluetooth® on the web at www.naxa.com to get up to the minute Optical digital audio news, alerts, and documentation for your device. For RCA stereo audio additional assistance, please contact Naxa Technical 3.5mm AUX audio...