Charging The Transmitter With The Wireless Charger - Catchbox Plus User Manual

Charging the Transmitter with the Wireless Charger

1. Plug the included Power supply to AC mains outlet and connect it to the micro-USB socket on
the Wireless Charger. Green LED on the Wireless Charger will turn on indicating that device is
powered.
2. Place the Transmitter (securely attached inside the Cover) in its natural position to start the
charging. Always ensure there are no foreign objects located between the Catchbox and the
surface of the Wireless Charger.
If all LEDs are blinking it indicates an error. Please see section Troubleshooting
(page 40)
Always use the included Power supply to power the Wireless Charger. Other devices
may provide insufficient amount of power which will result in long charging time.
Wireless Charger emits strong electromagnetic field which could affect the
functioning of pacemakers and other electronic implants. These could stop
working or switch into test mode, causing illness. If you wear these devices
keep sufficient distance to device and warn others who wear these devices
from getting too close to the device.
Catchbox Plus 33