Table of Contents
Advertisement
Figure 20
Equipment Maintenance and Overhauling
5.1 Maintenance and Overhauling
[1]: Ensure the operator checks the grinding plate before using, if any loose bolts are located on the grinding plate or the
bolt, timely fasten the bolt and the nut for preventing uneven abrasion.
[2]: Using this equipment to grind, the operator shall ensure the surface is flat end even.
[3]: When using this machine, you must not block the vent hole. Ensure to clean the vent hole to ensure the normal
ventilation of the motor.
[4]: After 20 days in using, please clean the dust in the inverter and the vent hole, this operation can be done after trouble
shooting.
[5]: When dry grinding with this equipment, it must be equipped with a vacuum cleaner.
[6]: Please replace the gear oil (150#) regularly. The new machine needs to replace the gear oil after grinding
Chapter V
11
Advertisement
Table of Contents
Need help?
Do you have a question about the T2 and is the answer not in the manual?
Questions and answers