Philips LPC3180 Application Note page 17

Philips Semiconductors
- Select s_eroms.bin (in the
- Note the IARM Address of s_eroms.bin should be 0x0 while the Flash Address of
- Press the 'Program Flash' button;
- Reset the board when a dialog pops up, the download process will start automatically.
The whole download process should not take longer than a minute.
<12NC>
Application note
the directory) as below figure.
'./images/'
sibl_phytec.bin should be 0x200;
Rev.03 — 21 Dec 2006
Getting started Linux with LPC3180
'./tools/flashloader/'
AN10476
directory) and sibl_phytec.bin (in
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
17 of 28