iCliq i38 Quick Reference Manual page 8

Turning your iCliq™ on or off
How to turn your iCliq™ on:
• Press and hold the power button for 2 seconds until the status indicator light
flashes green.
How to turn your iCliq™ off:
• Press and hold the power button for 2 seconds until the status indicator light turns
red and then off.
Factory reset your iCliq™
How to factory reset your iCliq™:
• With your iCliq™ turned off, press and hold the headset and power buttons
simultaneously for 2 seconds until the status indicator light flashes green and red
alternately.
• Release all the buttons.
• Press and hold the headset and power buttons again for 4 seconds until the status
indicator light turns orange.
• Release all the buttons. Your iCliq™ is now turned off. Keep your iCliq™ off
for at least 30 seconds. Your iCliq™ has now been reset.
Using Your iCliq™
Once you have linked your iCliq™ and your phone, you can press the headset button
to make/answer/end a call or transfer a call from the phone to your iCliq™. You can
also press the power button to activate/deactivate the mute function. For best
performance, use your iCliq™ and the phone in the same room.
Making a call
How to make a call using the phone keys:
• Make sure the phone and your iCliq™ are on and in close proximity. Enter the
number as you normally would.
• When the call has been set up, the sound is automatically transferred to your
iCliq™.
• End the call by pressing and releasing the headset button, or press the hang up key
on the phone.
How to make a call using voice dialing*:
• Make sure the phone and your iCliq™ are on and in close proximity. Press and
release the headset button.
• When you hear a confirmation tone after a series of tones, voice dial as you
normally would.
• End the call by pressing and releasing the headset button, or press the hang up key
on the phone.
* Your phone must support this feature.
8