Table of Contents
Advertisement
Using the mute function
How to activate the microphone mute:
• During an ongoing call, press and release the power button to activate the
microphone mute. A single high tone is heard every second.
• To deactivate the microphone mute, press and release the power button again.
Troubleshooting
If your iCliq™ is not performing to your expectations, please try these simple steps.
Problem
Suggestion
No sound
Your iCliq™ and the device have to be paired to recognize each
contact
other. They also have to be within range of each other. During
between your
pairing, it is recommended that your iCliq™ and the device are
iCliq™ and
no more than 1 meter/3 feet apart and in line of sight.
other device
The status
This indicates that your iCliq™ has only limited speech and
indicator light
standby time left. Connect your iCliq™ to the charger and
flashes red
charge it for approximately 3 hours.
Losing
If the connection to your iCliq™ is lost during an ongoing call,
connection to
headset status such as connect lost message may be displayed on
your iCliq™
the phone. You must confirm the sound transfer by pressing the
yes key on the phone. Otherwise the call is disconnected after
30 seconds.
If your iCliq™ and the phone are within range, you can try to
transfer the call to your iCliq™ by pressing and releasing the
headset button.
No indication
If you charge a headset battery that has not been used for a long
of charging is
time, it may take several minutes before a steady red light
shown
appears to indicate charging.
Specifications
Weight
25 grams
•
Size
115mm (L) x 33mm (W) x 21mm (H) - without ear hook
•
115mm (L) x 49mm (W) x 21mm (H) - with ear hook
•
Battery
Powered by rechargeable Lithium battery
•
Talk time – 3 hours, standby time – more than 3 days
•
10
Advertisement
Table of Contents
