Table of Contents
Advertisement
Pairing your iCliq™ with the phone
Before you start using your iCliq™, you must pair your iCliq™ with the device you
want to use it with, for example, a mobile phone. Once you have paired your iCliq™
and your phone, the connection remains valid until your iCliq™ is factory reset or is
paired with another phone.
Note: The phone must have Bluetooth capability and support the headset profile.
Pairing your iCliq™ with the phone the FIRST TIME or AFTER FACTORY
RESET
The first time your iCliq™ is turned on, it will automatically be ready for pairing.
How to pair your iCliq™ with the phone the FIRST TIME or AFTER FACTORY
RESET:
Place your iCliq™ and the phone side by side.
•
• Activate the Bluetooth function in the phone. To do this, please refer to the user
documentation for the phone.
• Press and hold the power button for 2 seconds until the status indicator light turns
green.
• When the status indicator light flashes green and red, immediately initiate
Bluetooth pairing in the phone to link it to your iCliq™. To do this, please refer to
the user documentation for the phone.
• When asked, enter the iCliq™ passkey (default passkey 0000) and press the yes
button on the phone. When pairing has been completed, the status indicator light
flashes green. Your iCliq™ is now in standby mode (i.e. ready for use).
Pairing your iCliq™ with the phone in SUBSEQUENT USES
How to pair your iCliq™ with the phone in SUBSEQUENT USES:
• Place your iCliq™ and the phone side by side.
• Activate the Bluetooth function in the phone. To do this, please refer to the user
documentation for the phone.
• With your iCliq™ turned off, press and hold both the headset and power buttons
simultaneously for 2 seconds until the status indicator light flashes green and red
alternately.
• Immediately initiate Bluetooth pairing in the phone to link it to your iCliq™. To
do this, please refer to the user documentation for the phone.
• When asked, enter the iCliq™ passkey (default passkey 0000) and press the yes
button on the phone. When pairing has been completed, the status indicator light
flashes green. Your iCliq™ is now in standby mode (i.e. ready for use).
Checking the battery status
How to check the battery status:
• Make sure your iCliq™ is turned on.
• When the battery status is normal, the status indicator light flashes green.
• When the battery status is low, the status indicator light flashes red and a battery
low tone is heard every 60 seconds.
7
Advertisement
Table of Contents
