Paxton Net2Air User Manual

28/06/2012
Ins-30084 Net2Air USB bridge

Technical Support

01273 811011
Technical help is available:
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Net2Air wireless communication

The access control unit connects to the Net2 system using Paxton Net2Air proprietary wireless technology through
a Net2Air bridge.
Radio signals do not always behave as you might expect. For example, a mobile phone that displays a full signal
on one part of the site will lose signal completely only a few metres away. These problems can be addressed by
using the Net2 site surveyor kit (690-200).
See also: XAN1095 - Net2 wireless access control - How does it work? < http://paxton.info/974 >
X AN1096 - How to plan a Net2 wireless installation < http://paxton.info/975 >
X Ins-30096 - Net2Air site surveyor < http://paxton.info/1015 >
Net2
Server

Software Configuration

Plug the device into a spare USB port on the PC. Restarting the Net2 server will then register the unit automatically
in the Net2 software. This displays in the Net2 Server Configuration Utility/Net2Air bridge as a fixed IP.
Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Net2Air USB bridge
support@paxton.co.uk
Software - Requires Net2 v4.14 or later.
Paxton
Reader
Control unit
Page 1