Enable the WiFi adapter of your Leica Viva Controller
Go to "Start" "Settings" "Network and Dial-up Connections".
Select the icon of the WiFi device (e. g. "TIWLNAPI1") and press "File".
If the menu lists "Disable", the WiFi device is already enabled.
In this case leave the control panel without any changes.
If the menu lists "Enable", press "Enable" and leave the Control Panel.
Leica ScanStation Pxx Remote Control
Switch on the Leica ScanStation Pxx and wait for the boot process to finish.
Select "Status" to get to the "Status Menu".
3/6