Download
Share
Print this page
Leica ScanStation P Series Manual
  1. Manuals
  2. Brands
  3. Leica Manuals
  4. Remote Control
  5. ScanStation P Series
  6. Manual

Leica ScanStation P Series Manual

For cs20 controller
Hide thumbs Also See for ScanStation P Series:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Leica ScanStation Pxx
Remote Control Manual for Leica CS20 Controller
The ScanStation Pxx Remote Control for CS20 application is intended for controlling the Leica
ScanStation Pxx remotely by a Leica CS20 Controller via WiFi.
On the Leica ScanStation Pxx, which should be controlled remotely, the firmware version 2.50 or higher
has to be installed. The remote control will not work with former firmware versions.
The following hardware is needed:
Leica Controller CS20.
Leica ScanStation Pxx laser scanner
Installation of the ScanStation Pxx Remote Control for CS20 Application on the Leica CS20
Controller
 Copy the installation file "CS20_ScanStation_Pxx_RemoteControl.CAB" onto a USB memory device.
 Switch on the Leica CS20 Controller and connect the USB memory device to the controller.
 If the Leica Captivate application is running, close this application by pressing "Fn"  "Exit".
Pxx RemoteControl via CS20.doc
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Schweiz
www.leica-geosystems.com

Advertisement

loading

Related Manuals for Leica ScanStation P Series

Summary of Contents for Leica ScanStation P Series

  • Page 1 ScanStation Pxx remotely by a Leica CS20 Controller via WiFi. On the Leica ScanStation Pxx, which should be controlled remotely, the firmware version 2.50 or higher has to be installed. The remote control will not work with former firmware versions.
  • Page 2  Double-click “My Device”.  Navigate to the USB memory device.  Double-click the file “CS20_ScanStation_Pxx_RemoteControl.CAB”.  The application will be installed. A start-up menu folder in “Start, Programs, ScanStation Pxx RemoteControl” will be created. After installing the CS20_ScanStation_Pxx_RemoteControl application the setup file “Pxx_RemoteControl.CAB”...
  • Page 3 If the menu lists “Enable”, press “Enable” and leave the Control Panel. Leica ScanStation Pxx Remote Control  Switch on the Leica ScanStation Pxx and wait for the boot process to finish.  Select “Status” to get to the “Status Menu”.
  • Page 4 In the “WiFi Configuration” menu set: WiFi Operation = On  WiFi Connection = Access point mode   Start the ScanStation Pxx Remote Control for CS20 application on your Leica CS20 Controller by selecting “Start, Programs, ScanStation Pxx Remote Control”.
  • Page 5 Within the “ScanStation Pxx Remote Control for CS20” dialog press “Find scanner” and wait for your Leica ScanStation Pxx to be listed within the list of available scanners.  As soon as your Leica ScanStation Pxx is listed, select it and press “Connect”.
  • Page 6 General Remark  The USB port of the Leica Viva Controller will not replace the USB port of the Leica ScanStation Pxx while you are connected to the scanner. In order to download scanning projects, upload control point files, or system files you always have to...