Table of Contents
Advertisement
Figure 3-2 Link status
3.3 Site survey
Site Survey tab shows that the connection status of the adapter. (If
connected). See figure 3-3.
SSID – Means the adapter is connected or will be connected, the right
figure shows that the adapter is connected, SSID is the default network.
BSSID – Means the MAC address of connected AP or the basic service
device of AD Hoc AP.
Channel – Means the adapter current signal channel, the figure is
variational because the signal could search the available channel and
variate the channel.
Encryption – Means wireless network encryption information. All the
devices in the network have to use the same encryption to ensure the
communication.
Two network modes：
Infrastructure (access point) - means to get connection by AP, once
connected, AP will permit you visit wireless network or LAN network. If
the connection is infrastructure, the Channel will display Auto.
AD Hoc – means to get connection not by AP, AD Hoc can be setup
conveniently without plan in advance. For example, all the persons in
the meeting could share the meeting record in the meeting room.
7
Advertisement
Table of Contents
