Table of Contents
Advertisement
3.To configure the wireless connect properties, please right click the
wireless icon in the tray and choose "Status", open the page "wireless
network link status", see figure 4-3.
The page of"General" in Figure 4-3 displays link time, speed and signal
strength which is shown in green line, 5 lines means good, 1 line means
worse.
Click the button "Properties" in Figure 4-3 and choose the tab "wireless
network'' configuration in Figure 4-4 to show firstly chosen network. Use
the button "Add" to add the "SSID" of available network, if there are
several available networks, link priority could be configured by the
button "up" and "down". The icon like a transmitter tower shows the
current linked AP. Click "Properties" to configure authentication of
wireless connection.
Figure 4-3 Wireless Network Connection Status
15
Advertisement
Table of Contents
