Ralink WL-150G User Manual page 13

Table of Contents

Advertisement

Protocol (TKIP) and Advanced Encryption Standard (AES)
FORBID – forbid the encryption function.
WEP -- the shared key performs the encryption before data wireless
transportation, you could communicate with the wireless devices which
use the same shared key.
TKIP --TKIP uses the stricter encryption rules than the WEP, and also
use the existing WLAN arithmetic to realize the encryption. TKIP will
verify the security configuretings after shared key encrption is ensured.
AES --AES is a 128 bits symmetrical encryption technology, could work
in the multi-layer at same time.
WPA shared-key.
This option could be started until you choose WPA-PSK or WPA2-PSK.
Choose "TIKP" or "AES" in the area of "Data encryption" to start the
encryption process. Notice: 8-64 characters are needed.
Key configuration
This option could be configure until you choose WEP in the area of
Data encryption. WEP is 64/128 bits data, used encrypt and decrypt
data packet.
Display key
After choose this option, your configuration key will be displayed.
【802.1x configuration】
When choose "WPA" or "WPA2" during authentication, you could
configure this option. If choose "Open" and "Shared-key", you could
also click "802.11 x authentication" to configure 802.11x.
See Figure 3-8.
12

Advertisement

Table of Contents
loading

Table of Contents